RF-101F

Axial Lead Vertical Forming Machine (Stand-up Mount with Kinks)

電阻立式成型機-直立式成型架高

The RF-101F is an axial lead former designed for 180° vertical stand-up mounting with dual standoff kinks (>= 5 mm height) for high-density PCBA layouts (110 pcs/min). Specifically suited for low shoulder (>1.2 mm) and compact pitch grids, it features modular quick-change die configurations.

Processing & Feature Tags

Taped Axial

Loosed Axial

Odd Packaging

BDF

Kink - Outward/Inward

Straight Cutting

Taped - Radial

LSE

AC Motor

BOWL

ENGINEERING SPECIFICATIONS

Machine Specifications & Performance

Processing Capacity 6,600 pcs/小時 (110 pcs/分) / 6,600 pcs/Hour (110 pcs/min)

Power / Air Supply 110V/60Hz ; 220V/50Hz

Standard Tolerance ±0.3mm

Dimensions (L×W×H) 1130(L) x 760(W) x 850(H) mm

Net Weight 115 kgs

Catalog Page & Status

P.10 (Catalog_0010) • 在產 (Active)

【Key Machine Features & Advantages】

Axial lead vertical forming machine for stand-up mounting with kinks, engineered for high-density PCB DIP assembly.
Suitable for axial resistors, diodes, and inductors requiring 180-degree single-side lead bending for vertical stand-up mount.
Specifically designed for low shoulder (C min > 1.2 mm) and narrow pitch (P fixed at multiples of 2.5 mm).
Forming double kinks provides secure stand-off height (fixed >= 5 mm) and mechanical self-locking upon board insertion.
Versatile die tooling system: custom dies manufactured to drawings; simply change die sets for different specifications.
Multiple feeding configurations: Dual loose/taped (RF-101F), Loose-only (RF-101FA), and Taped-only (RF-101FB).
High throughput of 110 pcs/min (6,600 pcs/hr); when taped leads are too short for double kinks, YF-730 tape ripper is recommended.

【Revision Notes】每一種形狀適用一組模具；入料模式分為散帶合併款 (RF-101F, 115kg)、散裝款 (RF-101FA, 75kg) 與帶裝款 (RF-101FB, 65kg)。可選配廢料篩盒與 VR 調速馬達。若帶裝料線腳不足成型雙K，建議加裝拆帶頭或選用 YF-730。

Lead Forming & Geometric Parameter Specifications

Unit: mm / Custom tooling available

Dimension & Bending Schematic RF-101F

Callouts match specifications in the table (Click image to enlarge)

Code	Parameter	Standard Value / Range	Engineering Notes
A_BODY	Body Length (A)	3.8 ~ 20 mm	Resistor, diode, inductor body length
B_DIA	Body Diameter (B)	2.3 ~ 8 mm	Suitable for 1/8W ~ 5W various types of component body diameters
C_SHOULDER	Shoulder (C)	最小 > 1.2 mm (Min > 1.2 mm)	Supports low shoulder height vertical vertical bending
D_HEIGHT	Stand-off Height (D)	固定至少 > 5 mm (Fixed at >= 5mm)	Key fixing height set according to the forming tooling
E_LEAD	Lead Length (E)	可調 (Adjustable)	Fine adjustment of vertical needle length after cutting
P_PITCH	Lead Pitch (P)	2.5 的倍數 (Fixed at 2.5 Multiples)	Standard narrow pitches such as 2.5mm, 5.0mm, 7.5mm
W_WIRE	Wire Diameter (W)	Ø0.4 ~ Ø1.5 mm	Forming tooling cutter supports wire diameter and can form thick wire diameter components

SERIES COMPARISON MATRIX • Catalog P.06 Reference

RF / HRFT Series Axial Lead Bending & Forming Capabilities Matrix

Comprehensive dimension limits and capacity comparison across Slim, Standard, Heavy Duty, Vertical, and Cut Only models

U_BEND

Horizontal U-Bend

V_BEND

Vertical Stand-off

CUT_ONLY

Straight Cut Only

Parameters / Models	Slim Manual: HRFT-301S Motorized: RFT-201S	Standard Manual: HRFT-301U Motorized: RFT-201U	Heavy Duty Manual: — Motorized: RFT-201W	★ Current Vertical Manual: HRFT-301F Motorized: RFT-201F	Cut Only Manual: HRFT-301L Motorized: RFT-201L
A Pitch (Body Length for F)	5 ~ 40 mm	6 ~ 40 mm	6 ~ 40 mm	4 ~ 18 mm	3.5 ~ 37.6 mm
B Lead Length	3.6 ~ 10 mm	3.6 ~ 10 mm	3.6 ~ 10 mm	可調 Adjustable	—
C Shoulder	> 0.6 mm	> 1.2 mm	> 1.2 mm	> 4 mm	> 3 mm
D Body Diameter	Ø1.5 ~ Ø8 mm	Ø1.5 ~ Ø8 mm	Ø1.5 ~ Ø8 mm	Ø1.5 ~ Ø8 mm	Ø1.5 ~ Ø8 mm
H Support Length	—	—	—	< 25 mm	—
W Lead Wire Diameter	Φ0.35~0.6 / Φ0.35~0.8 mm	Φ0.35 ~ 0.8 mm	Φ0.35 ~ 1.3 mm (粗線徑)	Φ0.35 ~ 0.8 mm	Φ0.35~0.6 / Φ0.35~0.8 mm
P Pitch	—	—	—	2.5 ~ 13.5 mm	—
R Bending Angle	—	—	—	1° (直立折彎)	—
CAP Motorized Capacity	40,000 pcs/H	84,000 pcs/H (超高速)	40,000 pcs/H	40,000 pcs/H	40,000 pcs/H